+91 98914 11300 / 011- 40451916
info@nexgensolution.biz

Basic Life Support Ambulance

Interiors

  • Complete interior paneling of the sidewalls, partition, roof & back door panels with integrated fiber glass reinforced panels.

  • Integrated Oxygen supply system in the vehicle with cylinder manifold cabinet for attaching two nos. of D-type oxygen cylinder (including used cylinders) and integrated piping system terminating at the outlets at the patient head end of the side wall. One outlet normally meant for Oxygen therapy through flow meter, one meant for driving breathing equipment like ventilators and one standby to driver aspirators etc. the cylinders are places by cutting the body from the co-driver’s side.

  • Doctors Chairs.

  • Attendants seat for three Persons.

  • Waterproof ply flooring.

  • Integrated washbasin for washing hand with separate tanks for fresh and disposed water 20L each. The washing tap of is operated by a small pump operated through hand-operated switch provided on the wall of the patient cabin near the basin. Separate tank for the disposed safety at the allocated location. The wash station is provided with mirror, soap dispenser, towel hanger/ring.

  • Waste collection bin with cover.

  • Integrated platform /console/stand for Ventilator, Defibrillator & Patient Monitor with facility for fixation of the device ensuing adequate safety during transportation. The respective suppliers should provide any special fixtures of the devices for such application.

  • Two nos. of integrated stand for infusion bottles.

  • Fire extinguisher near the rear door on the wall.

  • Wide footstep entry on the rear end to facilitate easy & safe movement in and out of the patient cabin.

  • Integrated AC and DC supply inside the vehicle with concealed.

  • Interior lightning in the form of roof lights or any other equivalent suiting the internal aesthetics of the cabin.

  • High intensity revolving lights (four nos. with two in each side) with variable sirens and public address system all integrated in one system in the front side of the vehicle at the top, having separate amplifier unit with the controls in the driver’s cabin.

  • 6 nos. of path illumination light on the bank side for evacuation in darkness or low light scenarios.

  • Integrated for an additional battery integrated with 800 VA inverters. The additional batteries as well as the original battery both are placed below the driver’s seat for better space management & convenience.

  • Integrated provision for both the batteries to be charged from external AC power through sockets while stationary and from the alternator while the vehicle is on movement.

  • Up-gradation of vehicle alternator to 90 Amps. Alternator.

  • Intercom Telephone facility between patient & driver cabin.

  • Sliding drapes for the windows.

  • Standard External art work and writing on the ambulance.

  • Roof top mounted air conditioning 8000 kcal/hr.

Support Accessories

  • Oxygen Cylinder with clamps.
  • Stretcher clamps & rail.
  • Emergency alarm switch.
  • Material holder elastic.
  • Paramedics Seat & Squad bench which foldable into second stretcher with mattress.
  • Wash basin & tap.
  • Power ports.
  • Digital Wall clock
  • Mirror.
  • Patient and attendant stabilization arm holds and net.
  • Torch light clamp of universal size.
  • Oxygen Cylinder spanner holder (Optional).
  • Towel holder with clamping system.
    Dustbin.
  • Water tank.
  • Air conditioning

Driver Cabin

  • Wireless with siren.
  • Public address system.
  • Electrical control panel.
  • Flashlight light holder.
  • Writing Board/ pad holder.

The MDT system incorporates Global Positioning System (GPS) technology, allowing operations centre officers to locate a vehicles’ position on a mapping screen. This provides officers with the ability to locate and dispatch the closest available resource to emergency incidents.